1. CONVERTS EXISTING RUST: Chassis Rust Converter replaces existing rust with a dark and protective polymeric barrier. It transforms rust into an inert coating, sealing out moisture and preventing future rust and corrosion.

2. PROTECTS IRON AND METAL SURFACES: It revives and protects iron and metal surfaces on automobiles, dumpsters, equipment, railings, etc.

3. PREVENTS FUTURE CORROSION: This rust treatment prevents future corrosion by locking out moisture from rain and snow. Dries in 20 minutes.

4. NON-TOXIC, FUME-LESS FORMULA: It is a non-flammable, low VOC, water-based treatment. It is non-toxic and emits no harmful fumes.

5. NO MORE SCRAPING, SANDBLASTING OR GRINDING: Creare a barrier that’s weather-proof and ready for a fresh coat of paint for your car's chassis. This Chassis Rust Converter will provides more than twice the rust protection.

How to Use:

1. Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, dust, and grease.

2. Application: Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint.

3. Clean-up: Application equipment should be cleaned immediately with soap and water.

4. General: Do not apply this product if the surface temperatures are below 50°F. Store in a cool, dry place, protected from freezing or temperatures above 100°F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required.

Description:

1. Material: Water-based primer

2. Net Content: 100ml

Package Includes:

1 x Chassis Rust Converter

1 x Brush